40ft High Cube Container – Used, Watertight and Airtight

Used 40ft High Cube Shipping Container in Good Watertight Condition

Most buyers who search for a used 40ft high cube shipping container are solving one problem: they need a lot of dry, lockable space and they do not want to pay for factory paint. That is precisely what this unit is. It has been inspected, judged good condition, and sold on the strength of a sound shell and working door seals rather than its looks.

Good condition on a used box means the parts that carry load and keep weather out are intact — corner castings, top and bottom rails, side panels, gaskets. It also means you will see the history: minor dents, scratches, and paint that has faded unevenly. Weathering steel is designed to develop a protective surface layer as it ages, so that patina is doing a job rather than signaling failure.

Specifications at a Glance

• Condition grade: Used, good condition — water and airtight, cosmetic wear present
• External dimensions: 40' × 8' × 9'6"
• Internal dimensions (approx.): 39'5" × 7'8" × 8'10"
• Door opening: 7'8" wide × 8'6" high
• Interior volume: roughly 2,700 cubic feet
• Tare weight: approximately 8,750 lb
• Scope of sale: container unit only — foundations and modifications are arranged separately
• Delivery: flat $500 to all 50 states, scheduled after the order is confirmed

Getting Value From a 40 Foot Storage Container

Forty feet is the sweet spot for a lot of operations: enough length to hold real volume, still deliverable to most commercial yards and larger rural properties without heroic maneuvering.

• Contractor storage that stays on one development for the length of the build
• Portable workshop space with a bench run down one wall
• Modular building blocks for multi-container structures
• Bulk inventory holding for wholesalers and online sellers
• Grounds and facilities storage at schools, clubs, and municipal yards

What to Check on Arrival and How Delivery Works

When the unit lands, do a five-minute walkthrough. Close the doors and look for daylight around the gaskets, check the roof for standing water or soft spots, and press the floor near the door sill where wear concentrates. Then set it level on four bearing points so the door frame stays square, since a racked container is the usual reason doors stop sealing.

Delivery needs the container length plus about 40 feet of straight run, with roughly 15 feet of overhead clearance. If you would rather start from clean steel, the one-way 40ft high cube is the same footprint in new condition. Otherwise, browse our high cube container selection, the full 40-foot range, or every unit in the used container category. Delivery terms and access requirements are set out on the shipping policy page.

Frequently Asked Questions

What does "water and airtight" mean on a used container?

It describes a shell and door seal system that has been checked and found to keep weather out: no daylight through the panels, gaskets that compress properly, and a roof without holes. It is a storage-condition description rather than a certification for ocean freight. If you need certified transport capability, ask about cargo-worthy stock.

Does the listed price include delivery?

No. Shipping is charged as a flat $500 to any of the 50 states, added at checkout, and the delivery itself is scheduled and routed once your order is confirmed. Listed prices are tax-inclusive. Foundations, pads, cranes where required, and any modifications are separate and arranged before the container is dispatched.

Can this container be converted into a workshop or office?

It is a common starting point. The high cube height leaves room for framing, insulation, and lining without losing usable headroom. Before you cut anything, confirm the roof and floor are sound and plan where doors and windows will sit relative to the wall framing. Conversion work is arranged separately from the container purchase.